Tracy Crook wrote:
OK, I'll get another shot of the busted bulkhead.
BTW, There were only 3 spaces set aside for it last year (all full before
the opening day) and they are doing everything they can to discourage us.
The parking crew almost never knows anything about auto powered area and
last year they planned to lock the pedestrian gate at the far end of the
field where they stick us. Laura complained and had to volunteer to be a
security guard at that gate before they would agree to open it.
Just contacted Sun 'n Fun about getting more space for auto powered section
this year and they are more hostile than ever. Their suggestion was to park
in our aircraft type areas (RVs in RV parking, etc.) and said ours was the
only request for auto parking they had received.
So, if you plan to fly your rotary powered (or any other auto powered)
plane to Sun 'n Fun, send an Email message to Auther Burt
fun_flyer@compuserve.com and request some more room this year.
Note that there is an underscore between fun and flyer in the email address.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
Good idea Tracy.
Do it anyway even if you are not flying in and respectfully ask if they
can put all the auto engine airplanes in the same place.
Paul Lamar
Paul, how many subscribers do you have to this newsletter?
Any idea how many are of those are interested in putting a rotary in an airplane?
I know from attending past Sun'n'Fun's that there are a steady stream of people
wanting to look at the auto conversion installations, but I'd like some hard
numbers to refer to when e-mailing them. I know of Tracy, Ed Anderson, Me,
possibly George Graham and Dave Atkins. Anybody else on this list intending to
attend Sun'n'Fun this year with their rotary powered airplane?
Finn
Shop online without a credit card
http://www.rocketcash.com
RocketCash, a NetZero subsidiary
Well over a 1000 at last count. Many are lurkers.
There's Power Sport and Bill Hughes from FL I think. Chuck Dunlap will also try to make it
from Arizona. We may also see Tom Jordan from St Louis. He should be flying by now.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org