Subject: Methods of applying Vaseline to grooves was RE: "O" Ring
From: Paul
Date: 2/26/2001, 4:21 PM

Leon Promet wrote:

Hi Guys,

Vaseline is just fine. The way to apply the Vaseline to the groove is to
put some in a small plastic bag,  nip one corner off the bag,  and then you
can pipe the stuff on like a pastry cook doing fancy cake decorations,  (My
good lady June came up with this idea many years ago when I was first
teaching her to assemble engines).  Another option is to get a large bore
syringe from the vets.  Either way works.

Hylomar is OK,  but I gave up using it years ago as it is real tacky messy
stuff,  and is un-necessary.  The "O" rings stop the water getting out,
 and as long as the metal faces are not warped,  the gases won't come the
other way.  Didn't really find any benefit in longevity.  You also have to
be careful not to put too much on.  The excess will squeeze out and foul
the apex seals and cause starting and idling problems until it burns off.

So if you want to use it,  by all means,  but just a series of small dabs
at the base of the grooves is all that is necessary to hold the O rings in
place.  As you push the "O" rings into the grooves,  the Hylomar will ooze
up the sides.  Clean off any excess before assembly. .  Alcohol or acetone
seems to work,  and any that gets on the trochoid face can be removed with
a razor blade.

Enjoy!

Leon Promet

Leon, We are talking about 500 degree F teflon encapsulated silicon O-ring installation
here. I think it takes more than Vaseline to hold them in place. They are quite
stiff. Plain silicon o-rings such as used by Mazda  are attacked by raw gasoline.
The FAA has outlawed the use of silicone when there is any possibility of it
coming in contact with gasoline. Gasoline can seep down between the rotor housing
and the end housing and attack the silicone O-rings. This takes awhile but you
will notice the brown powdered O rings when you overhaul a ten year old engine.
Reports from the field on long term use of these teflon encapsulated silicon 
O-ring in racing use are very positive. They are nearly indestructible and are
resistant to almost all known chemicals.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org