Subject: Methods of applying Vaseline to grooves was RE: "O" Ring
From: Paul
Date: 2/26/2001, 8:29 PM


OK Gentlemen,
If you are going to use petroleum jelly to install O-rings, be aware that it
will cause the outer coolant O-ring to swell to the point that it will pop
out of it's groove. Vaseline works, but you have a limited amount of time to
assemble the engine before things start to get out of hand. Hylomar doesn't
affect the O-rings at all and it also offers additional sealing properties
that Vaseline doesn't have.
If you use Hylomar, make sure you flush the rotor housings (after assembly)
with ATF oil to keep any Hylomar that squeezes out into the rotor area from
fouling the rotor seals. This is especially important if you plan to store
the engine for a lengthy amount of time.
Bruce Turrentine

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org