Subject: Orings - what fits do far!
From: Paul
Date: 2/27/2001, 7:51 AM

Ken Powell wrote:

Ed,
I received the oil control orings yesterday and tried them last
night.  I found that the outer oil control oring (ASA568A-158
McMaster-Car part #9319k221)  fits pretty well (it's a little too
long but still fits in the scraper ring) but the inner would not
slide into the rotor when mounted in the oil control scraper ring
- the problem is that the section thickness is a little too
large.  Did you order one of these also - if so, please see if
you can get it to fit.  So we still need an inner oil control
oring and an outer coolant oring. The orings listed below are
correct:
1.  Inner coolant oring
part # = 9319K239
asa568a-175
qty = 4,  price = $9.94 each

2.  Outer oil control oring
part # = 9319K221
asa568a-158
qty = 4,  price = $7.17 each

This is the oring that I could not get to fit.  I will play
with it some more Wednesday night.
Inner oil control oring
part # = 9319K261
asa568a-245

Ken Powell

Try Creavey directly Ken. http://www.creavey.com

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

creavey-cat1.jpg