| Subject: Orings - what fits do far! |
| From: Paul |
| Date: 2/27/2001, 12:48 PM |
http://www.creavey.com
I went to the extent of cutting and measuring the correct O-ring. The actual dimensions for the inner oil control O-ring are: 3 mm cross section by 112 mm ID. It would be nice to find an AS # that would come close since true metric O-rings are pricey! Bruce Turrentine
The AirCraft Rotary Engine NewsLetter. Powered by Linux. http://home.earthlink.net/~rotaryeng/ http://www.linux.org