How about a simple muffler made like this-
Have a 2 1/2 inch tube with 3/4 slits tangentially about every 2" or so. Take
a screw driver and insert it into the slit and bend so that you have a louver
that sticks into the inside of the pipe. Put these as many of these louvers
in the pipe as you want. Then surround the 2 1/2 inch pipe with another pipe,
say 4 inches in dia. Fish tail the end of the inside pipe.
Brian Trubee
Redmond, Wa
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org