Subject: Vances new piston rotary engine.
From: Paul
Date: 2/27/2001, 2:10 PM

Russell Kent wrote:

Paul wrote:

Vance, there is no reciprocating motion in a Wankel engine. Nada, zip, zero, none!
EVERYTHING moves in a circle. The connecting rods in a WW I rotary rock back and fourth.

Oh REALLY?  So precisely what circle do the apex seals move in (relative to their containing slot)?  And the oil
metering pump: doesn't it have a linear piston?  And the throttle linkage?  And the thermostat?

Neener-neener... ;-)

Russell Kent

The apex seals are the only exception and they move less than  several thousands of an inch.
What oil injection pump? My aircraft rotary has no stinking oil injection pump.
The throttle linkage does not move when the engine is running at a constant speed.

I think I was wrong about the WW I rotary connecting rods but they did have
reciprocating intake and exhaust valves as well as push rods and lifters.

I think what has Vance confused is the rotor motion. The subtle distinction is if the
CG of the part (rotor) moves in a circle it does not reciprocate. Just because 
the rotor housing is a trochoid shape does not mean the parts that move inside 
it.... reciprocate up and down.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org