Neal Scherm wrote:
I came in on the middle of the discussion about a part broken by Tracy using a claw hammer. Was that the Powersport psru? Is this not supposed to be the best unit available? At $6500 it should be indestructable!
Can you catch me up on this?
Neal
The Power Sport PSRU uses this technique to attach the prop shaft to the bull gear
bulkhead but the parts are made from high strength steel. There is nothing wrong
with this idea. It works. The problem is with the powdered metal material the Ford
bulkhead is made out of. When used as designed this part is entirely adequate.
Drilling holes in it and bolting it directly to the prop shaft seems to be the
problem.
Yes the Power Sport PSRU may be indestructible. It should
be at around 65 pounds. Time will tell however if their high rigidity approach to
solving the torsional problems of intermittent combustion engines works. About 500
hours of actual flying time ought to do it. Many many PSRU's have been designed over
the past 100 years. Many of them had problems. Dozens of the Ross planetary types
based on the Ford C6 parts have been around for at least 20 years and we are still
learning.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org