"Rogers, Bob J." wrote:

I understand that Third Generation RX-7 Mazda Rotary engines (93-95) use the
electronic metering pump, which is controlled by the computer that runs the
engine.  If the original engine computer is removed, and an aftermarket
ignition and fuel control system is used, like the one supplied by Tracy
Crook, which one of these pumps is the correct one to use for the Third
Generation block, and what would be the mechanism to properly meter it?

Good question. From the looks of it the earlier mechanical pumps won't fit.
Mix the two cycle oil with the gas. One ounce per gallon.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org