erwin hornemann wrote:
I cant remember just how long ago it was, but this kind of muffler was
talked about
in sport aviation. It was called a "SWISS MUFFLER".
I will try and find the article again. If my memory serves me correctly
it looked
almost
exactly the same as the one Finn made.
regards Erwin
Hi Erwin,
The Swiss Muffler can be found in Tony Bingelis' Fire Wall Forward book
on page
112. The Swiss Muffler is different than what Finn, myself and Tracy are
building. The Swiss is really very much like a glass pack with a stainless
steel screen used as the perforated inner tube with fiberglass wrapped
around the rolled screen and then a 3 1/8" dia aluminum tube as the outer
shell. The ones we are experimenting with are tubes of varying sizes with
varying sizes of holes punched in them and the exhaust end restricted or
closed off.
The Swiss Muffler is apparently quite effective for engines in the 65-115 Hp
range, but I doubt the fiberglass would stand the heat of the rotary.
Ed Anderson.
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org