Neal Scherm wrote:

Does anyone have an electrical schematic for a single button electric

flap circut. The only one I can come up with will require a momentary AND a
constant contact switch. The actuator I have is the Aircraft Spruce
reversing polarity motor.

Thanks,
Neal

The ones I have seen use a DPDT switch, which can be either momentary
or constant.  I would select constant with a pair of limit switches to
protect the
motor and linkages by shutting off the drive in the appropriate direction when
the linkage hits the stops.

Bill
Long EZ builder & pilot
BSME, MSME

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org