Archie wrote:
I saw an aircraft, (believe at OSH), that had
all the tubes interconnected via internally
drilled holes. It also had a filler valve and
pressure gauge in the cockpit. The premise
was that no moisture would infiltrate a
pressurized area, and a secondary use would
be that a leak would indicate a crack or weld
failure.
Archie
Standard race car space frame technique back in the 60's.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org