I propose to be able to supply a complete package which will include
bell
housing, drive plate, vibration isolator, ring gear, starter motor
plus
all the necessary nuts, bolts etc to do the job. All bolts will be
plated
Metric H/T grade 8.8 unless you require something tougher. It is
entirely
possible to use H/T aircraft bolts, but unless the threads in the
motor's
end housing are helicoiled to take the same aircraft quality bolts, it
would be overkill. Let me know if you are interested.
Cheers mate,
Leon Promet
We will put our heads together when I get down there Leon. I am working
that out with my wife as we speak.
BTW is 29 inches center to center on the rubber bushings OK with most of
you guys
building a side by side type airplanes? This will accommodate a stock
turbo, custom
turbo or tangential muffler in the cowl. You RV4 guys will be on your
own. The tandem RV8 uses the wide cowling. We will make the PSRU mounting
surface flat
with no holes so Tracy can bolt up his PSRU and make any changes he wishes
except for the 3.550 distance from the back of the engine to the PSRU
mounting
plane.
How does this sound guys? Tracy? Let me know with comments before we make
the patterns for the castings.
Sounds good to me. This eliminates any concerns over lateral stress for the
engine mount/redrive adapter. Keep in mind that nothing fits together
without design work. The adapter thickness needs to be matched to the input
shaft length, the damper (if Leon ends up making these) needs to be matched
to the input shaft spline, etc, etc. Leon, will the auto trans flexplate
(that I use) fit in the proposed bellhousing? It is slightly larger in
diameter that the manual stick trans flywheel. If Leon makes the flywheel
this would be a non-issue.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
Leon!!.........."Excellent news"......"Way to go".......
A man after me own heart.
"Sits on the Po-tty and gets down to business"!
Thanks Leon and Good Luck
Butch
Be down there about next Monday Leon. Send me your phone number. Will rent
a car at the airport. No wife this time. I'll bring some teflon o-rings.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org