Neal Scherm wrote:

Does anyone have an electrical schematic for a single button electric

flap

circut. The only one I can come up with will require a momentary AND a
constant contact switch. The actuator I have is the Aircraft Spruce
reversing polarity motor.

Thanks,
Neal

Chuck wrote:

Neal, I built one with two relays, activated by two small pushbuttons
located on the control stick. If you are interested I can FAX the

schematic

to you.

Chuck Dunlap
dunlapc@aepnet.com

"Bass, Jerry" wrote:

I made a 'servo' control with a handle that you move and the flap follows. I
use a Flap screw from Van's. It draws 1.25 amps, and my Transistors will
drive 2 amps.  $200 for the kit.

Jerry Bass

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org