Subject: Your constant speed prop for sale
From: Paul
Date: 3/7/2001, 6:14 PM

Peter Cowan/Lexi Cameron wrote:

Paul, can you give me the full scoop on your prop?  model number, hours since last overhaul and date, how much filing down it has had etc.
Are you willing to crate it for shipping?
Thanks
Peter.

My McCauley hub design is 2A34C203 hub serial number is 752728
blade design is 90DCA-8 diameter is 82 inches (not 84)
Low pitch setting is 12.5 degrees and high setting is 25.0 degrees
The last entry in the prop log for overhaul was about 300 hours ago. 
It was inspected and painted after that but I misplaced the paper
work on that. As I recall it was less than 50 hours ago and the
paint on the blade leading edges is hardly worn off.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org