Subject: tube oil
From: Paul
Date: 3/7/2001, 8:10 AM


Archie wrote:

I saw an aircraft, (believe at OSH), that had
all the tubes interconnected via internally
drilled holes. It also had a filler valve and
pressure gauge in the cockpit. The premise
was that no moisture would infiltrate a
pressurized area, and a secondary use would
be that a leak would indicate a crack or weld
failure.
Archie

Standard race car space frame technique back in the 60's.

Paul Lamar

        Also used to confirm helicopter blade integrety, Virg


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org