Subject: tube oil
From: Paul
Date: 3/8/2001, 3:49 PM


 > >> Peter Cowan/Lexi Cameron wrote:
 >>
 >> Does any one know for sure whether it is Boiled or raw linseed oil that
 is used
 >to coat inside of 4130? Thanks
 >> Peter.


   AC 43.13-1A Says (in part) "Coat the interior by flushing with hot linseed
 oil
 or paralketone, or other corrosion inhibitor.  The flushing liquid
is usually
 introduced through small holes drilled in the tubing.  Allow the flushing
 liquid to drian and plug the holes with a screw or by other means to prevent
 the entry of moisture. "   So - no real answer here, altho it may not make a
 difference.

 You *DO* have AC43.13-1A (new replacement, actually) on order, don't
 you?
         ;-)

 Bill
 Long EZ builder & pilot
 BSME, MSME

Jerry Hey wrote:

Even better,  buy a quart of Tube Seal from ACS for $11.80.  Jerry

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org