Subject: Oil pressure woes
From: Paul
Date: 3/9/2001, 7:37 AM

Ed Anderson wrote:

 Finn,

    When I first installed my remote oil filter (I use a Wolf Aircraft
fixture) I had the intake and output reversed.  In my case using a Champion
aircraft filter oil refused to flow as well.  I went through all the
analysis steps from plugged line to bad oil filter until I reversed the
hoses, then it worked fine.

   By the way, I believe that the oil comes into the inside of the filter
element and flows through the filter material.  At least on my set up, the
hose from the oil pump output fitting on the front cover goes to the center
of the oil filter bracket which though a 3/4" pipe (which the oil filter
screws on)  goes down into the center of the oil can.

  Hope to see you at Tracy's tomorrow

Best Regards

Ed Anderson

Am I missing a gathering?

Paul Lamar

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org