Finn Lassen wrote:
Yesterday I decided to change oil and filter; about 60 hours since last
change.
I turned the engine to get oil pressure for about 30 seconds with no
joy. As I was a quart short, I packed it in and went to work. Today I
came back, added the last quart, and turned and turned the engine (even
ran it for a minute or two < 2000 RPM) - still zero oil pressure. Seems
I tried everything - backfilling oil, adding oil to the filter,
loosening fittings "to make it easier for the pump to fill up the lines"
!!??). (Of course, messing with a perfectly good fitting just resulted
in a leak there I now have to fix.) In desperation, after 4 hours, I
finally put the old filter back ("in case I had gotten a bad new
filter"). Fortunately noone had emptied that trash can. Lo and behold!
Instant oil pressure!
When I bought the new filter I decided to get a higher quality FRAM
filter which has a membrane preventing oil from draining back to the
pump (keeping the filter full of oil). It finally dawned on me that when
I moved the filter down near the front outlet (home made adapter plate),
I had reversed in and out to the filter! Apparently the oil is supposed
to come in on the outer circle and out through the center?
So here's the question: can you think of any liabilities with flowing
the oil the wrong way through the oil filter (obviously can't use the
one with the one-way "valve")?
Could this be the reason I've had to turn the engine so long before
getting oil pressure the first and earlier times I changed oil?
Up till now I've been using the cheap Perculator (?) filter from
Discount Auto Parts.
Finn
Rule of thumb is 'Don't change it unless you know all the ramifications'.
Almost all oil filters (including the 1 Pureolator I checked) have the
one-way check valves. Don't know why you got oil pressure with the one you
had unless it has the pressure relief valve arranged such that it could
bypass the check valve. It that was the case, you were getting no oil
filtering.
Tracy
That Mazda is one tough engine :-)
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org