> > Finn Lassen wrote:
> > >
> > > Yesterday I decided to change oil and filter; about 60 hours since last
> > > change.
> > > I turned the engine to get oil pressure for about 30 seconds with no
> > > joy. As I was a quart short, I packed it in and went to work. Today I
> > > came back, added the last quart, and turned and turned the engine (even
> > > ran it for a minute or two < 2000 RPM) -- still zero oil pressure.
Seems
> > > I tried everything -- backfilling oil, adding oil to the filter,
> > > loosening fittings "to make it easier for the pump to fill up the
lines"
> > > !!??). (Of course, messing with a perfectly good fitting just resulted
> > > in a leak there I now have to fix.) In desperation, after 4 hours, I
> > > finally put the old filter back ("in case I had gotten a bad new
> > > filter"). Fortunately no one had emptied that trash can. Lo and behold!
> > > Instant oil pressure!
> > >
> > > When I bought the new filter I decided to get a higher quality FRAM
> > > filter which has a membrane preventing oil from draining back to the
> > > pump (keeping the filter full of oil). It finally dawned on me that
when
> > > I moved the filter down near the front outlet (home made adapter
plate),
> > > I had reversed in and out to the filter! Apparently the oil is supposed
> > > to come in on the outer circle and out through the center?
> > >
> > > So here's the question: can you think of any liabilities with flowing
> > > the oil the wrong way through the oil filter (obviously can't use the
> > > one with the one-way "valve")?
> > > Could this be the reason I've had to turn the engine so long before
> > > getting oil pressure the first and earlier times I changed oil?
> > >
> > > Up till now I've been using the cheap Perculator (?) filter from
> > > Discount Auto Parts.
> > >
> > > Finn
Another post explains why................But,
The downside of flowing the wrong direction is the chance that the paper
element has failed and some of the paper went down stream from the filter
location. Cut open the old filter and determine if the paper element is
intact. If so then reverse the hoses and go on about your business. If the
element has opened up, and parts are missing, a teardown and cleaning of
everything is in order. Fram is to filtration, what
Lucas is to electrical devices.
Lynn E. Hanover
> Rule of thumb is 'Don't change it unless you know all the ramifications'.
> Almost all oil filters (including the 1 Pureolator I checked) have the
> one-way check valves. Don't know why you got oil pressure with the one you
> had unless it has the pressure relief valve arranged such that it could
> bypass the check valve. It that was the case, you were getting no oil
> filtering.
>
> Tracy >>
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org