Subject: Cost of Mazda Rotary Engines was RE: Wankel debate
From: Paul
Date: 3/15/2001, 7:05 PM
CC: Kis Newsletter

Leon Promet wrote:

HooBoy,

Somebody just hasn't done their homework!  I don't know where he gets the
$8,000 Yankee clams bit just for a rebuild?  I've just been on the phone to
my happy Mazda Concessionaire,  and I can buy a BRAND SPANKING NEW FACTORY
MAZDA 13B REW short engine for under $12K AUD.  That guys,  at current
exchange rates (under 50 cents US  to the AUD) is about $6K USD Yankee
Greenbacks!!  I can do better in quantity!!  How many do you want?

My dealer mate tells me that there is currently none in stock in Japan or
here and they are quoting 10 weeks delivery to Oz. Shipping charges from
here to the US are $250 ~300 AUD  per shipment for
paperwork/cartage/packing crate etc, plus $120 AUD a tonne/cubic meter,  21
day sea freight to either LA or SF.  4 of these engines would fit in a
cubic meter, and be way less than a tonne.

Alternatively,  I can supply you,  personally hand built by myself,  a An
REW 13B built with Series 5 9.7:1 high compression rotors from ALL NEW bits
(side housings,  rotor housings,  , stationary gears,  eccentric shaft and
all seals and gaskets as well as lightened and balanced and ported etc,
will cost about the same $12K AUD,  including an allowance for a core for
the stuff that doesn't wear out like counter weights,  front cover etc.
 Add a few hundred extra if you want certificated X-ray/ultrasonic flaw
testing done.

We also have core rotary engines suitable for rebuild for $500 ~ $1000 AUD
depending on condition and model.

Fully reconditioned Series 6 engines, rebuilt on an exchange basis in this
country go for about $7500K AUD  Exchange.  That's all new seals,  new
rotors,  new rotor housings,  and new stationary gears, re-machined and
re-nitrided side housings etc.  Same goes for the earlier motors brought up
to the REW specs by using all the latest model parts and internals.

There is another added attraction.  Once the motor has done 1000 hours in
an aircraft,  you rebuild it with just seals and gaskets and stationary
gears, (about $2500 AUD in bits). After the second 1000 hours,  you then do
the same thing again, and then sell the whole thing to somebody who needs
one to put in a car or a boat,  and then go and buy another brand new one!!

That way, you get a BRAND new rotary engine,  built out of all new bits for
much less than HALF the cost of a rebuilt Lyc or Con or Frank.  The bonus
being more grunt,  and a lot less vibration,  and from what I see,  a lot
more reliability  (providing you keep the sucker cool and don't have oil
pressure problems!!).

The PSRU situation is another matter,  so it's up to Tracey to work out
what it costs to zero time one of his units.

Cheers,

Leon Promet

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org