Finn Lassen wrote:
Thanks for all the responses!
Friday I flew up to Tracy to meet Ed Anderson. We removed the old oil
filter to have a look at it. The Purolator filter also indeed does have
a membrane covering the outer circle of holes, acting as a oil return
restriction. A closer look at my "working" filter revealed that the
membrane had been ruptured over about 1/3 of the holes.
This of course explains all my oil pressure woes from day one when I
nuked the main and rotor bearings through all my oil/filter changes.
So, I broke down and reversed the in- and output ports. Not an easy
operation due to the way I mounted my oil filter adapter plate on the
engine on a 90-degree elbow from the oil pump front endhousing output
hole, between the engine and firewall. But with the moral support from
Ed and help from Tracy in his well-equipped hangar/workshop, we did it.
We did some ground run-up sound level testing of all three planes, which
Tracy or Laura will post.
We were going to do some flyby sound level testing, but sadly Ed lost
oil pressure, and was in the process of removing the engine Sunday
afternoon when I left for home. We know it's the oil pump pulley key, as
he found that in the oil sump. I'm sure he'll post the details, once
home.
Finn
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org