Subject: 88 verses 91 turbo
From: Paul
Date: 3/17/2001, 12:50 AM

Here is a picture of the turbo mounted on my engine along
with a cut off intake manifold. Bent aluminum tubes will be
welded to this intake manifold stub to form the final
complete intake manifold. A little more metal trimming on the stub 
is necessary.

Unfortunately what you lose with this trick is the water cooling 
connection for the turbo. I will just plumb it to the heater outlet 
probably.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

turbo-cutoff-intake-man.jpg