"Harley, Ageless Wings" wrote:
It is possible to push the key out of the keyway when sliding on the drive
sprocket and to trap the key between the drive sprocket and pump housing<<
Might it pay to install a pin in the keyway (maybe a roll pin so that it has
little chance of coming out later)in a blind hole to keep the key from
sliding back as the sprocket is pushed on?
Harley
A possible problem with that is a stress concentration in the shaft that
might cause it to break. Of course the keyway itself is a stress concentration.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org