Subject: Oil Pressure - Flying without the Woodruff key
From: Paul
Date: 3/16/2001, 11:26 PM

Leon Promet wrote:

Hi Guys,

All that is needed is a little care and to check that it is actually in
place.  It's not hard once you get the knack! (Hint:  Do a few trial
assemblies without the chain first!!). You can actually see if the key is
IN, simply by having a look with a flashlight.  For those that don't have
good eyesight,  the paper clip trick is a failsafe test.  Start messing
with roll pins etc and introducing stress risers is not "optimal" when all
that is needed is a little bit of diligence.

Now that everybody knows about it,  there shouldn't be any more "cock-ups".
 The other problem with doing something with a roll pin is that the late
model shafts are as hard as the "Orbs of Hell" ... they're nitrided!  If
the key is loose in the keyway,  a GENTLE tap with a blunt instrument on
one edge of the keyway is all that is necessary to supply enough grip to
retain the key during assembly. If it is aligned correctly,  with the top
of the key dead parallel to the shaft, the sprocket will just fall on.!!

Take care,

Assume NOTHING
Double Check EVERYTHING ... three times!!

Cheers,

Leon Promet

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org