Subject: 88 verses 91 turbo.
From: Paul
Date: 3/17/2001, 2:45 PM


The turbo on the left is the 89-91 version I bought in Sydney.
 A pleasant surprise for me was the double sized waste gate which
 is just what we need in aircraft turbo's.

I had previously mentioned that the '91 waste gate appears to be double.  The
problem is that there is a divider in the exhaust (to maintain the exhaust
pulse all the way to the turbine).  Each half of the waste gate serves only
half of the exhaust.  Once I get it running, if I decide that I need more
waste gate I will consider putting a small hole in the exhaust to allow both
waste gate ports to be used with each exhaust pulse.

Dave Leonard

That's interesting Dave. You need to send me pictures. I had no
idea it was two separate valves. You appear to be ahead of me. Do you have your
motor mount yet? Don't forget, one runner is longer than the other
so the pulses may not be that far apart after all.
Be careful of the hole. It might screw up the heat distribution and cause
cracking. I am going to leave well enough alone and monitor the
turbine RPM.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org