Rino Lacombe wrote:
To Leon,
I would like to get one 89-91 turbo and exhaust manifold like Paul.
Do you have any suggestions how I could proceed to buy one.
Who should I get in contact with.
I have rebuilt a 88 turbo 13b and the turbo and manifold have cracks.
I included one photo of my work this far, the engine is on a stand, I will start it
when I get the redrive and the prop.
Thanks
To Paul,
In the photos, you can see that I used the stock intake manifold flange and welded
aluminum pipes to it, 1,25" dia. for the primaries and 1,5" dia. for the
secondaries. The runners are 23" long, we do not have much choice in lenght if
because of the oil filler pipe. I used a 4" pipe for the plennum and a 92 Ford
Crown VIC. throttle body. I figure that if it feeds a large V8 it should be enough
for a 1.3 leter engine. We will see when I start it. It should run next May.
I am waiting for Tracy's redrive, controller and the prop.
Rino
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org