Leon Promet wrote:
Hi Jeff,
You want six or eight units of a standard Rover V8 correct? No problem, I
can check first thing tomorrow as I have to see him with Paul's drawing
anyway. He's got bell housings that will fit almost ANY motor to ANY
gearbox, and if he hasn't, and can see a market for them, he'll usually
make them on spec.
I doubt if he will have a STOCK one off the shelf, but if he doesn't have
it, he would happily make it if the quantities (6 ~ 8) are correct. It
would just be a matter of changing the pattern for the rear face to take
the stock box rather than the Tojo box.
I'll be posting a full listing of what he has once my new website happens.
(ETA 2 ~ 3 weeks). He has some really weird and wonderful stuff!
I just need to know what sort of Rover V8. The one out of the older Rover
3.5 L car (same basic shape as the 2000), the SDI 3500, or the one out of
a (St)Range Rover, and if so what model. Do you have a piccie of the
backside of the engine for ID purposes. The Poms had all sorts of funny
tricks with different dowels and bolt holes, and starter positions even
with the same basic motor. That's not an issue as the casting is the same.
Can you also give me a measurement from the engine face to the gearbox
face please?
I'm sure he has them to mate up to Toyota 5 speed boxes as a buddy of mine
used to put the 3.5 l SDI engines into Triumph Stags, and the Triumph
sedans upon which the Stag was based. Cracker conversion. Especially when
you filled the suckers up with Chevy internals and Buick heads!! We also
had a Leyland car out here called a P38 (actually it was called a P76, but
they are universally known as P38s because they were only half a car!!).
They were 4.5 L , had a similar but slightly different bolt pattern, as
do the Terrier V8 4.5 L truck motors, so I'm sure we can accommodate you
somehow!
Send me some pix, and the depth of the bellhousing and I will get back to
you El Pronto!
Cheers,
Leon Promet
Leon please change your signature file and add your email address so people
can contact you directly on things they need. No problem here on the newsletter
but some people like to keep things private.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org