Subject: Bolt-in exhaust for 13B and 20B
From: Paul
Date: 3/19/2001, 5:58 PM


You all have my permission to make one of these for your self.
The advantage is; there is nothing on the inside to melt. Everything is on
the out
side where it can receive cooling air and it is tuned for 6000 RPM.

Paul Lamar

    Is this design intended to fit within the cowling, or external to the
cowling?  You say "Everything is on the out side," but I'm not sure how you
do it unless you have it where the cowl panels meet.

Robin

"inside" meant inside the muffler and yes inside the cowling as well.
It fits with the 29 inch wide motor mount scheme I think Robin.
Not really sure about that until I actually build one.
I highly recommend side exhaust if possible. Gets the heat out as 
quickly as possible.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org