Leon Promet wrote:
Hi Paul,
Mate, we are in violent agreement that the plane that extends from the
bottom of the pan to the redrive has to be clear for the radiator. No
Contest!!. That was not the real issue. The point I was trying to make is
that the starter should be on the left side, away from the radiant heat
of the turbo. I still haven't had a cogent reason why it HAS to go on the
exhaust side.
Moreover, for somebody like me or Ed or Tracey who is/will be using
"Chipmunk Cheeks'" and split radiators for cooling, (and "Plugs Up") it
is not an issue. I can put the starter hole anywhere on the housing that
it will fit, either plugs or exhaust side. I'm happy to make whatever
suits a bunch of guys, and I will make something to suit my own
application as well and offer that as an option. As we discussed when you
were over here, the rad in my BD4 might even go in the back a la P51!
All the first trials and prototypes will be made from a wooden pattern,
which is REAL easy to modify. Once we are happy with the final design,
then we will make a metal pattern plate for the production items.
All I want is the correct and sensible reasons for doing something. Any
input is gratefully accepted at this stage. That's why I am canvassing the
topic (bit like an agent provocateur! Sorry, I can't help myself }:>)).
But I just want to make sure I haven't missed something. Jeff already has
the drawings (I had a long discussion with him yesterday), and I'm seeing
him again on Thursday for further discussions.
So can you please send me the dimensions of Tracey's PSRU. You also have a
side elevation of the thing mounted on your alloy plate. Can you give me a
copy of that as well so that I make sure that the starter is mounted high
enough to clear the radiator plane?
Thanks mate,
Leon
I think we all agree on the right side looking forward from the pilots view
on a tractor airplane. Left side when looking back from the prop.
Tracy, can you upload the diameter of the PSRU where it bolts to the bell
housing? Leon would like to provide a machined pilot or recess so the PSRU will
be exactly centered. I know you now rely on the 12 1/4 inch bolts
to center the redrive. I tried to measure it but my vernier caliber would
not go that large. I guess it to be around 6 and 9/16th inch OD.
Also what are the dimensions of the seal counter bore?
Leon, the last sketch is my approximate idea of what is inside Tracy's redrive.
Not official.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org