I am doing this manifold first as it is not practical to use a bent tube
manifold with the stock turbo. Its too tight of a package. Bent tube
manifolds work fine on a NA six port however. This is very similar if
SNIP
Ed Anderson wrote:
Paul,
Looking over the design, I noticed that there is a 3.2" distance between
the centerline of the inner Primary tubes. I was wondering if there is any
disadvantage to moving the secondary and primary tube closer together to
minimize real estate occupied under the cowling.
Ed Anderson
They are spaced like that so the long pipes clear the oil filler neck on the
other side of the engine. With a low cowl like the Lancair and Cruiser
I will need an oil filler trap door directly over the oil filler neck.
I guess I could add an oil filler pipe anywhere but no need of doing extra work
if you don't have to.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org