I'm kind of in the same boat. I'm trying to fit my manifold into the space of an RV-4 cowl without any bumps or protrusions. ( this is a non- standard cowl without the cowl cheeks) The oil filler neck and dipstick occupy some valuable real estate there. I'm toying with several ideas. One is to put the resonation chamber and throttle body on top of the engine. It's tight, but I have about 5" between there and the engine cowl. I should give me 18" intake runners.
The other scheme is to cut off the oil filler projection on the spark plug side of the engine and weld on a plate. Have a remote oil filler and put a sight glass for oil level(I'd scavenge one off a japanese motorcycle). The throttle body would go down the spark plug side of the engine in between the sets of spark plugs.
I've got a question though- does it matter if I put the inlet from the throttle body on the outside radius of the resonation chamber? Would that screw up the shock waves traveling back and forth between the two rotors?
Brian Trubee
Redmond, Wa
Don't know Brian but the book Scientific Design of Exhaust & Intake Systems
has some suggestions for pressure recording instrumentation that will tell you.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org