Subject: Cosmo Starters vs RX7 Starters was RE: third Gen auto starter bellhousing for Tracy redrive?
From: Paul
Date: 3/20/2001, 10:22 PM

Leon Promet wrote:

SNIP >>

Hi Marc,

Now I have your picture!  Mate,  this is a COSMO Auto sedan set up,  NOT
RX7.  TOTALLY Different animal altogether!  All my comments were based on
RX7 stuff!  You confused me when you said RX7.  All RX7 starters come in
from the rear.

Your setup is totally different.  All my references were to starters that
fit from BEHIND.  There are also other Mazda starter configurations.  The
early Twin dizzy engines,  and the RX2 auto,  and Rotary Pick Ups had top
mounted starters sitting over the engine.. (Most of the engines still have
the cut out at the top).  No good for sump down orientation in an aircraft,
 but perfect for a plugs up orientation as the starter sits out the side.
 The downside of these units as they were as heavy as Sin itself!.

To make the 20B starter work on a custom bell housing,  it's probably a
separate project,  and would require a totally different engine mounting
arrangement,  especially with the extra power of the triple rotor.  Howe
ver,  I will get hold of a starter,  and see if I can incorporate it in the
current design.  This hole for this might just  double as an inspection
hole.

I had a real good look at one of these units yesterday,  and its a pretty
bulky thing,  but it can easily be done. It's just a flat flange.   I do
however  think there are other better starter arrangements,  and I am
currently investigating a suitable readily available starter.  There are
other geared starters that can be made to work as well.  I'm still
researching this.  I need to solve it for my own purposes,  as I like the
idea of an inboard starter position.

Leave it with me for a few days.

Cheers,

Leon Promet
peon@pacific.net.au

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org