Subject: Design & Weight of Bell Housing was RE: Cast bell housing Take 3
From: Paul
Date: 3/20/2001, 7:39 PM

Very simple Leon. It becomes redundant to specify tolerances as
modern NC mills are what they are. 

You put in .1874 in the NC program and that is what you get to the 
best of the NC mills ability. Usually .0005.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

tracyPL.GIF