Subject: Design & Weight of Bell Housing was RE: Cast bell housing Take 4
From: Paul
Date: 3/20/2001, 10:51 PM

Leon Promet wrote:

Hi Paul,

@@
You wrote:

Its only obsolete Leon in the position of the starter.

@@
OK,  just a small detail!  So how about you do me a nice new one with the
starter in the correct position?  I don't have computer drawing facilities
here.

No can of worms. The drawings are fine. Its very simple.
12.... 1/4 inch bolts on a 5.875 bolt circle.

@@
Yeah,  sounds simple, ... if you are not a machinist, and don't understand
how machinists think (down this way anyway)!!  I can only repeat what I
said in the previous email.

@@
QUOTE>

##
OK, I'm not trying to be difficult,  but as soon as I give this to a
machinist,  first thing he is going to ask me is "What is the tolerance
on
the PCD? 1 thou,  5 thou.  10 thou?" What is the tolerance for
concentricity?

(Remember,  I worked next door to a
gear cutter for 10 years,  so I got to know how they think!!).

SNIP >>

##
Maybe the best way is for Tracey to send me a BARE machined PSRU housing
(an a sample oil seal) so that I can give it to the machinist and just
say
"here,  make this fit,  and make it concentric".  Best way, ...  then the
monkey is on the Machinist's back!!  I'm more than happy to sign a
confidentiality/non-disclosure agreement with Tracey,  and promise I
won't
copy his PSRU design.  I can then machine up a mandrel to check for
concentricity of the bell housings,  using the PSRU housing and a dummy
engine block as a gauge tool.

END QUOTE>

Can you get 1/4 inch aircraft bolts down there?

@@
Yes!  But poisonous as hell price wise though!!  Just give me a machined
bare (no gutz) PSRU housing.  Saves all this "BullS**t".  The machinists
and pattern makers are used to working with BOTH ends of the job!  I've got
plenty of engines,  so all I need is the other end!

Cheers,

Leon Promet
peon@pacific.net.au

Keep reading Leon.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org