Subject: Rare Cosmo three rotor car for sale.
From: Paul
Date: 3/20/2001, 12:23 PM


"Harley, Ageless Wings" wrote:

Paul...

Took your advice and did a little research online about importing vehicles.
I still tend to forget that one can find just about anything on the net!

>From the US Customs site, here is the page detailing the requirements of
importing foreign made cars into the US:

http://www.customs.ustreas.gov/imp-exp2/informal/car.htm

It includes the following headings:
    Prior Arrangements
    Documentation
    Cleaning the Undercarriage
    Your Car is Not a Shipping Container
    Dutiable Entry
    Free Entry
    Cars Imported for Other Purposes
    Safety, Bumper and Theft Prevention Standards
    Federal Tax
    Emission Standards
    A Word of Caution
    Exceptions
    Driver's Plates and Permits

And for those in New York State, in addition to the above:

http://www.nydmv.state.ny.us/register.htm#homemade

Click on the "Import a Vehicle" link.

Interesting fact in New York is that it has to comply with California
emissions standards, UNLESS it has more than 7500 miles on it!

I imagine other states are similar.

Harley


It does not look easy but if you dig even deeper there could be a way
around the red tape quagmire. In other words; don't take no for an answer.

Paul Lamar


I don't know if things have changed in the last 5-10 yrs, but it used to
be that you had to do several things to bring in a 'non conforming' car.
First was post a bond equal to the value of the car, to be forfeited if
you fail to meet their (EPA, etc) specs.  Second, bring car up to
crash stds,: replace glass, replace upholstery (fireproof), door impact
beams, bumpers, etc.  Third, bring emmissions into specs, typically
with a reprogrammed FI and one or two catalytic converters.
Many VERY wealthy folks try this with rare stuff like Ferraris and spend
about what the new cost is to have pro conversion shops bring them
into compliance.  I have heard that a certain VERY, VERY rich
car nut from Redmond WA had a Porsche 959 (~$250K) in the US
for a while, even drove it around.  Even Mr. G couldn't keep it, tho
and it was re-exported.   Doug Shane has told me about nonUS spec
hot BMWs that have to go to the crusher after a short "testing" period or
be exported.   This was last year.

Best of luck, but I'll bet there is no way.  Hope I'm wrong!

Bill

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org