and mounts the starter trailing
towards the firewall.
I don't understand this completely, but I see a direction of rotation problem
developing here. You can't move the starter from the psru side to the
engine side and use the same starter. It will turn backwards, bendex and all.
Bob Darrah
That is true Bob with the early starter but obviously the late
3rd gen starter is opposite rotation. IMHO the big problem is: this starter
is extremely rare due to the very small numbers of 3rd gen RX7
sold in the states. For that reason 3rd gen engines are very expensive
and so too are the starters. I don't know of anyone planning to get
400 HP out of their turbo 13B installed in an aircraft where they
might need the subtle structural improvements in the 3rd gen 13B-REW.
Leon mentioned only 350 HP in his airplane.
Besides all that the REW dual sequential turbo's
crack and are ill suited to use in an aircraft anyway.
Given that it makes no sense to cast up a 3rd gen starter bell housing
that will fit Tracy's redrive for such a small market but of course Leon is
free to do it if he chooses.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org