Subject: third Gen auto starter bellhousing for Tracy redrive?
From: Paul
Date: 3/20/2001, 3:25 PM



Hi Marc,

The short answer is yes.  Feel free to post this and you comments on both
the newsletters.

If you can give me some sketches of what you would prefer,  I'll make sure
I incorporate that in the final patterns.  It's easy to do at this stage,
 so I'm canvassing as many ideas as possible before the final pattern is
cast in Alloy.

You say that you have the turbo on "the other side" .  I can't read your
Jpegs for some reason. Paul's Jpegs always come through OK,  so can you
check them and resend them.  Otherwise, a hand sketch will do.


STARTER TYPES

I checked the bountiful stock at Jap Performance and there are really only
3 different starters.  The NA MANUAL one that has the solenoid vertical and
fits the small diameter ring gear.  This fits everything prior to 1985,
 and the FC manual NA engines as well.

As far as I'm aware, (an I have researched this fairly carefully),   the
late model auto starters are the same as the manuals,  and the ring gear is
the same diameter,  auto & manual.

The two turbo ones that have the solenoid at right angles to the flange are
identical mounting wise.  The mounting hole is the same for the manual,
 and auto,  and the later REW (your '94 model).    The  Only difference is
that with the '92 ~ 94 REW starter, it has equal legs,  where as the FC
starters have unequal legs.  All this is not a problem,  as I have a
completely flat surface and can put the actual hole and the retaining bolts
anywhere I like.  It's just a matter of telling the NC machine where to
drill!

STARTER POSITIONS

I haven't decided on exactly where to mount the starter yet.  I will
probably incorporate multiple positions to accommodate as many applications
as possible,  and can be specified at the time of ordering.  It will then
be a matter of boring the hole in the right place,  and drilling and
tapping the retaining bolts.  What is the matter with the standard position
anyway.  Is there something I have missed?

We  already have the patterns for this,  and I was planning on just
modifying an existing pattern and adding the mounts, and trepanning the
bell hsg at the level of the starter mount flange.  (See Paul's Jpeg . This
is real easy,  cheap,  and cost effective.  To do Paul's starter position
on the exhaust side,  it's a whole new pattern.  I don't mind,  but it just
adds to the cost and the time and the effort for no real benefit (as far as
I can perceive)..  The plan was to do a quick and dirty prototype first,
 and once fully sorted out,  we would make the final dedicated pattern.

See,  the way patterns are made,  for low volume,  wooden ones are used,
 and they are good for prototyping, and can be easily modified by cutting
up bits of wood and gluing then on or cutting them off.  Real easy to work
with..  For higher volume, and long term use,  then an aluminum pattern is
made which is far more durable.  However,  it is not so easy to modify.

TRACEY'S REDRIVE.

I'm waiting on engineering drawings fom Paul/Tracey so that I can make sure
it will fit.  That's one of the design parameters.  I don't want to
re-invent the wheel,  and Tracey's PSRU is quite cost effective,  and has
proven very reliable,  so I'm more than happy to make sure it does fit!!

So let me know your requirements,  I want to make sure that I can
accommodate as many variations as possible.  I'll also be doing a "Plugs
Up" version for all  those heretics (like me }:>)) that march to a
different drummer!

Best wishes and kindest regards,

Leon Promet
peon@pacific.net.au

Leon,
Are you going to be able to accommodate the third gen automatic starter
arrangement on your castings? (see attached pic of my 20B with an FD (1994)
auto tranny bellhousing and the automatic tranny starter) Perhaps a
relocation of the motor mount to clear it on one side? I will have a TO4
turbo on the other side as well. I plan on using Tracy Crook's redrive
components mounted to the front of it.
I would be in the market for two of them if it did.
Marc Wiese << File: 20Bautobellhousing.jpg >>  << File: 20B2.jpg >>

marc wiese wrote:

I will try and send only one .jpg this time (large picture file-700kb+).
The hand sketches I would make would duplicate the layout on a 1993 and on
automatic tranny rx7. I will make some anyway (by hand). Send me your
address, I will send pictures as well as sketches.

The automatic transmission gear reduced starter on these late models has
the solenoid sticking out at about 90 degrees. It mounts via an integral
casting which is part of the starter assy to both the rear engine housing,
and to the bellhousing on the plug side-down low. It straddles the two. Are
you familiar with this setup? I DO have the bellhousing, and if worse comes
to worse can ship it to you to use for this version as a pattern if you
can't find one locally (as long as I get it back)!
Marc Wiese

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

20b2.jpg