Subject: 88 verses 91 turbo.
From: Paul
Date: 3/21/2001, 10:22 AM


 > Paul,
 >
 > Several month ago, I bought the '91 13B Turbo, including stock
turbocharger, from
 > Ernesto Sanchez.  I haven't had time to do a good examination of the
engine yet, but
 > I have noticed that the turbine/compressor is seized, and there is a
white
powder
 > residue all over the compressor fins.  The turbine does not have this
residue.
 > Hopefully the turbocharger isn't destroyed, and can be rebuilt.
 >
 > Have you had a chance to get a hold of the compressor chart for this
turbo?
  It would
 > be interesting to see what the boost range is for higher altitudes.
 >
 > Scott

 They are not indestructable. One of the things I will do for sure is
monitor
 the TIT and try to keep it below 1600 F on takeoff.

 I don't have a map for the 91 turbo.

 Paul Lamar


I haven't been able to find the map for the stock 91 either.  A guy at
turbonetics told me they could install a 46 trim TO4 compressor on the stock
turbine for about $700.  They would probably overhaul the whole unit at the
same time.  Sounds like that might be the way for you to go.

No mount for me yet.  Still working on the airframe... soon?  I hope?  :-)

Dave Leonard

I am not going to put a bigger compressor  on mine until I test it as is.
I don't think we need more boost.

If they can put an Inconel TO3 turbine in there than maybe that would be worth it.
BTW the manifold flange bolt pattern is not stock TO4 or TO3. Too bad.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org