Subject: FD Auto Starter/Bell Hsg was RE: Cosmo Starters vs RX7 Starters
From: Paul
Date: 3/23/2001, 1:32 PM

Leon Promet wrote:

Hi Marc,

I'll have to confess that I have never seen an  3rd Gen RX7 in Auto
config..  Neither has either of my Jap connections.  Must be a USA only
item!  'Ya lives and ya learns, ... eh!!"  Only in America!   I talked to
one guy yesterday that has actually seen one.

My Mazda factory workshop manual just has the manual transmission.  I can
only assume that Mazda did indeed use the Cosmo tooling for the auto
version.  Does the auto engine have an extra bolt tag on the top on the
centreline of the engine,  instead of the cut out??

Have you got a shot from the top and bottom of the motor you can send me??
 I'll check with my Factory Mazda man today.  He has access to full Jap
factory parts catalog online, but I don't know if he has access to the Yank
stuff.

Can you also tell me where they mount.  Off the bottom of the rear plate
like the manual engine,  or like the Cosmo,  off the center housing??  To
use that side starter,  they have to have a giant cut out in the plug side
of both the bell housing and the rear plate,  and have that extra bolt tang
on the top of the housing,  just like the 2 and 3 rotor Cosmo engines.  The
proposed bell housing  I'm making to Paul's specs will fit on the back of
the engine (All the dowels and other holes are the same),  but the mount
will get in the way of the side starter.

However,  I'm fully intend doing a separate bell housing for the Cosmo
engine setup.  The 2 rotor engines are reasonably plentiful in Japan,   and
the rear housing/starter  is identical to the triple rotor,  and now I find
that there are a lot of them in the USA in FD chassis!.  This will allow
the use of the side starter for all apps   Eventually,  I want to be able
to accommodate both types of engines.  Side mount starter Cosmo type
engines,  and the conventional rear mount starter engines.

I'll keep you guys informed

Leon Promet
leon@promotorsport.com.au

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org