Martin G Yates/STA/Lotus wrote:
Hi guys
I am of the belief that too much oil pressure can harm your bearings by
washing away the bearing material.
Please can someone confirm/deny this.
Basically, on the 2nd Gen list, there's an RX7 owner who's oil pressure is
running at about 110 (on 2 different guages ) above 3000 rpm. Someone said
it can do no harm, except drain away some horsepower.
thanks
Martin Yates
Education Specialist
Lotus Park, The Causeway, Staines, Middlesex, UK. TW18 3AG
email : martin_g_yates@lotus.com
Office tel no: 44 1784 445-424 Fax no: 44 1784 445-580 or 44 1784 499-424
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org