Subject: 2.85:1 psru ratio
From: Paul
Date: 4/2/2001, 1:42 AM


Hmmm,   I'm not really sure I followed that but the basic thing I was
getting at in my first  message on this subject was that regardless of
what
the theoretical best prop and gear ratio is,  There seem to be no actual
props you can buy that are optomised for high speed (200 mph range) and
relatively low prop rpm.   Even if Paul's point of giving up some
takeoff
performance in order to get better cruise is stipulated, there is still
no
prop for sale that gives you the improved cruise.

I'm even less qualified to comment on insurance than I am on props!

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com


I'll ask Don Bates if he has a list of prop suppliers that use his
program.
Don?

Paul Lamar


"Donald R. Bates" wrote:

    Paul: Whirlwind and Aero Trading (NZ) use my program - constant speed
pros I believe. I have done some designs for Powerfin and custom work for
Hendrickson-Rowbear... Don Bates

Thanks again Don.

OK folks there you have it. You want a good prop for your 2.85:1 psru 
contact these people. Or you could buy Don's program, run the neumbers and tell
your prop maker what you want in the way of plan form, pitch, twist
and diameter.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org