Subject: 2.85:1 verses 2.17:1 psru ratio
From: Paul
Date: 4/2/2001, 1:35 AM

"Donald R. Bates" wrote:

    Paul:
Airfoil CL after stall is roughly half max CL and stays there
until you lower the angle-of-attack to half of max CL alpha, i.e., you have
a hysteresis loop and thrust will be cut proportionately. Sorry I don't have
time to review your program and data but it looks like you have a reasonable
handle on this. My programs are for highly optimized designing and not well
suited to analysis. The equations are all optimized and won't even converge
to a solution if trying to analyze a bad design. The idealized data Vance
gave you can serve to show the trends and adjusted based on any real data
you may have.
Don Bates

Thanks Don. That half CL is good enough for me. I can work backwards from
the takeoff distances that we have now. This will give us good enough
numbers.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org