John McLaughlin wrote:
1993 and up 13B REW's turbo engines with earlier high compression
rotors are best of all for normally aspirated.
Paul - I'm interested in what you mean by this. I'm rebuilding my 1990
NA engine with 1993 housings. Do the housings have qualities I should be
taking advantage of?
John McLaughlin
I just found out the 93 and later REW ports are larger than the earlier
engines.
Should get you more power. Are you changing just the rotor housings or the
end housings?
If just the rotor housings I don't think it will make much difference. The
bigger
intake ports are in the end housings of course.
Paul Lamar
Paul,
One additional advantage with the 93 rotor housings is that the water
galleys near the spark plugs come already machined with the grooves to
promote coolant turbulence and better cooling in that area.
Ed Anderson
Good point Ed. Did you have a nice flight home from S&F? How are the EGT's?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org