Subject: Leading coil ballast resistor failure Take 2
From: Paul
Date: 4/16/2001, 9:44 AM


Leon Promet wrote:

Hi Guys,

Sorry,  Ballast resistors sort of conjures up images of distributors,
and
caps and buttons and points and condensers.  I now know what you mean.
 Yes,  the igniters themselves are RENOWNED for failing,  especially if
they aren't kept cool!

Why buy new coils when you don't need too?

##
How about saving your butt, ... for one!!   Secondary  reason is to save
a
bit of weight.  But the main reason is they fail,  and therefore put
your
physical integrity in harms way if they happen to fail in the air!!  In
actual fact,  we are not talking about the coils themselves,  but the
IGNITERS that make the coils work!!  The coils themselves are crackers!!


Tracy wrote:

I'm getting the impression that you are mostly referring to the pre 1986
stuff Leon.  The igniters on the 81- 85 setup were very failure prone and I
have never recommended them.

Except for the leading coil ballast resistor (which is easily replaced with
a more reliable unit)  the 86 - 91 igniters are very reliable.   Why throw
the baby out with the bath water?

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org