Subject: EFI tank selector
From: Paul
Date: 4/17/2001, 8:39 AM


Kelly,
Is this what it looks like?  I bought this one from Quickkit.
The Glastar is a bit odd in that it has both a left and right header tank,
I think I'm going to first try returning fuel to both the header tanks at
the same time and keep things as simple as possible, if I can not get even
flow I'll go to switching tanks.  The simple approach supposedly worked well
with their injected Continental at the factory.

Perry Casson

Neal Scherm wrote:

That is what the electric fuel valve from JC Whitney looks like. It's
available with and without return lines. So 6 or 3 lines. They've been used
in boats and trucks for years. Check online at http://www.jcwhitney.com
Regards,
Neal


POLLAKŪ MOTOR-DRIVEN FUEL
                      TANK SELECTOR VALVES 

                       For fuel-injected systems operating up to 65 psi.
                      Designed to prevent returning fuel to incorrect tank.
                      Weatherproof fiberglass-reinforced nylon valve body.
                      Valve grounds to frame. Meets or exceeds DOT
                      standards. Fits 3/8" I.D. fuel hose. Recommended fuse:
                      10 amps. Can be wired so original dash gauge indicates
                      fuel level in either tank. Includes: switch, faceplate,
                      wiring connector, instructions. Hoses not included-order
                      separately. 2 styles: 3- or 6- port. 6-port valve required
                      on vehicles with 3 lines attached to fuel pump. For
                      12-volt systems. 

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org