I am considering removing the oil thermostat from
the oil cooler. Any comments?
Paul Lamar
Ed Anderson wrote:
Ok Paul, I'll ask - Why remove it and insert an plug? Guess with Calif Wx
you really don't need to get the oil temps up that far. However, might not
the removal act to increase pressure of cold oil on the oil cooler?
Ed Anderson
That's a good point Ed. I am counting on Mobil 1's superior low temp
low viscosity characteristics. (wide temp range for little change in viscosity)
One less thing to worry about failing. Might also reduce the pressure drop
in the oil rad.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org