Bill Freeman wrote:
Paul,
These units were pretty reliable and designed to fail in
the full cold position. The are a brass bellows about 2"
in diameter and about 1.5" long collapsed (cold). One
end has a 8mm female thread in a center boss with two
flats, mounts in a steel loop bracket in the outflow air.
When it gets hot it expands, closing down flaps in the
airflow. The operating rod end has a ~3mm female thread
and total motion is about 3/4". When failed it expands
fully. Neat units, the same from the 50s thru the 80s,
probably still used in the Brazilian aircoolers, still in
production, last I heard.
Bill
Long EZ builder & pilot
BSME, MSME
Those sound ideal for my cowl flaps Bill. Thanks.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org