<< "Bass, Jerry" wrote:

Yes, I install 5 PTC Chips for Switched output like Lights, Strobes and etc.
Then put 8 PTCs for non-switched distribution.  The LED lights if the PTC
opens. You have to remove the load to reset.

I tried them by short circuiting the output and the chip opens quickly.

I have 9 amp down to 1.5 amp chips.  Usually limited to 30 amps per board.
Today's equipment draws very little power. The wing tip running lights seem
to take the most.

Jerry Bass

Wow, that sounds like the same thing I bought from control vision for $250.   :-(

Dave Leonard

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org