Subject: Rotary Powered Aircraft at Sun & Fun
From: Paul
Date: 4/19/2001, 5:49 AM

Ken Powell wrote:

John Slade wrote:

While we're talking about rotary powered airplanes at S&F, I have a
question....

I'm in the process of setting up my 13B on a false Cozy IV firewall and its
time to choose a radiator.

I've read lots of theory about the fact that thin radiators are more
efficient. However, all the rotary powered planes I saw at S&F have 3 inch
thick evaporator cores for rads. I've been in contact with the owner of a
turbo 13B powered Cozy III who tells me his rad is 4 inches thick, and that
he has no cooling problems. George Graham recently sent me a drawing (thanks
George) showing his cooling system. Again - thick evaporator cores for rads.

Am I missing something here?
Regards,
John Slade, Cozy MKIV #757, progress: http://kgarden.com/cozy
West Palm Beach, FL

Not true John. The guy that lives in the hottest part of the country
with mountains to climb over, namely Chuck Dunlap, uses a two inch core,
he cools perfectly and he was there. As I recall Chuck's rad is of modest volume
.

George lives in upstate NY. How much volume does
the guy have with the 4 inch core and what is his cooling drag?
How fast is he going and what HP is his engine generating? The main
issue with thin rads is to reduce the cooling drag. That is why the auto
industry all over the world is going the thin core route and if you look
in your central AC unit you will see the same thing. Folded thin heat exchangers
.
It takes less HP to force the air through a thin, large area rad.

Paul Lamar


I refer everyone again to the work done by Fred Morino for Mike Wills.
Fred did this stuff for a living and knows what he is talking about.
Bigger is better and thin is better.  I am going crazy trying to fit
the largest, thinnest radiator possible in a RV-4; I am convinced that
there is significant drag reduction in this setup.

Ken Powell

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Ken-Powell-moreno1.gif